Mining Machinery Concentrating Tables For Minerals Gravity Shaking
Table Machine
Product Introduction
Shaking table is a gravity separating equipment for separating
fine-grained materials, which is widely used for separating tin,
tungsten, gold and silver, lead, zinc, tantalum, niobium, iron,
manganese, titanium iron and coal. Our factory has a long history
of producing shaking table, and constantly develop and innovate,
from the initial straight bed surface shaking table based on the
development of single curved wave bed surface shaking table
(1970s), and then to the double curved wave bed surface shaking
table (1990s), so that the shaking table's capacity, recovery rate
and enrichment ratio have been substantially improved.
| Model | KL-Ls<6-s> | KL-Ys |
| Table structure | Fiberglass reinforced plastic,embeded skeleton composit structure | Fiberglass reinforced plastic,embeded skeleton composit structure |
| Table size | 1500-1850×4500mm | 1500-1850×4500mm |
| Selecting area | 7.5 m² | 7.5 m² |
| Direction | Left type and right type | Left type and right type |
| Slope | 0-5degree | 0-5degree |
| Stroke | 10-30mm | 8-22mm |
| Stroke number | 240-360times/min | 240-360times/min |
| Feeding size | Coarse sand 2-0.5mmfine sand 0.5-0.074mm slurry0.074mm | Coarse sand 2-0.5mmfine sand 0.5-0.074mm slurry0.074mm |
Description of Shaking Table
Manganese, gold shaking table is one of the main gravity separation
equipment, which is widely applied to separate tungsten, tin,
tantalum, niobium and other rare metal, noble metal as well, It can
also concentrate iron, manganese and coal, etc, it owns the
features of high concentration ratio and sorting efficiency, easy
management and adjustment, achieving the final concentrate and
tailing in one time.
Applications of Shaking Table
Manganese, gold shaking table widely uses in ores such as tungsten,
tin, lead, zinc, gold, silver, tantalum, niobium, monacite, zircon,
ilmenite planting the fissure filling or the placer ore dressing
plant in processes the 3_0.019mm granularity ore in the rough
sizing and the selection work.
Features of Shaking Table:
1. Great ratio of high-grade ore, efficient separating, easy
operation, easy to adjust the stroke.
2. Strong wear resistance of the working surface.
3. Anti-chemical corrosion, acid and alkali.
4. Strong resistance to harsh evironment.
Working Principle of Shaking Table
The manganese, gold shaking table is shaken back and forth
longitudinally, using a slow forward stroke and a rapid return
strike that causes particles to raw along the deck parallel to the
direction of motion. The lighter materials move up and over the
riffles and down to exit on the tailings side of the table. Wash
water is fed at the top of the table at right angles to the
direction of table movement. These forces combine to move particles
diagonally across the deck from the feed end and they separate out
on the table according to size and density. Tables are most
commonly used to recover gold from hard rock ores, but can also be
used to recover other mineral materials of higher than normal
density. They do an excellent job of recovering small gold
particles, even with a fairly high feed rate.
